Used Juniper E-Series Broadband Service Routers Network Equipment
 The
E-series consists of IP edge and broadband services routing
platforms is a critical element in the control, delivery and
accounting of services at the network edge. The E-series
includes six different models: E320 BSR and E120 BSR platforms;
the mid-range ERX-1440 and ERX-1410 platforms; and the compact
ERX-710, ERX-705 and the ERX-310. All E-series platforms utilize
a single version of the proven JUNOS operating system which
ensures operational consistency.
Used Juniper's E-series of IP edge and broadband
services routing platforms includes six different models that are designed to
efficiently address the widest variety of service provider requirements. The specific
models include the high-capacity E320 BSR and E120 BSR platforms; the mid-range
ERX-1440 and ERX-1410 platforms; and the compact ERX-710, ERX-705 and ERX-310. All
E-series platforms utilize a single version of the proven JUNOSe operating system, which
ensures both feature and operational consistency.
Powered by the mature and broadly deployed JUNOSe, the E-series portfolio
helps service providers migrate from basic "best effort" IP services to exciting new,
high value multiplay services that bundle a broad set of IP voice, video and data
applications. JUNOSe, with its carrier-grade architecture, underpins the reliable and
efficient delivery of advanced services to both business and residential broadband
customers. In addition, JUNOSe is fully integrated with Juniper's Session and
Resource Control portfolio for automated service creation and policy-driven control
of network resources.
With an unsurpassed combination of powerful hardware packet processing and
software flexibility, the E-series portfolio and JUNOSe provides the performance, scale
and "always on" availability required at the network edge. Deployed in hundreds of
production networks worldwide, the E-Series portfolio is relied on by service providers
for its predictable high performance and service flexibility. These routers
cost-effectively address subscriber management, edge routing and service
aggregation requirements at carrier scale.
Channelized T3 Line Module
Part # CT3-12-F0
Product Description: 12 ports, Signaling: DS3, DS1, DS0, HDLC
Framing, Performance: line rate forwarding, T3s per board: 12,
T1s/E1s per board: 336 T1s, 252 E1s, DS0s per board: 2000, and
redundancy support: 1:N redundancy. It also provides:
cost-effective subscriber connections for DS1 and DS0 services
over a channelized interface, supports all major private line
protocols, including Frame Relay, PPP, HDLC, multilink PPP and
Frame Relay; and scales to support the aggregation of over 4,000
T1s in a single chassis, and over 12,000 T1s in a single rack.
Channelized OC3/STM-1 & OC12/STM-4 Line Module
Part # OC3/STM-1
Product Description: The cOC3-Frame has 4 ports, connector
type: multi-mode or single-mode, performance: line rate, T3s per
board: 12, T1s per board:336, E1s per board: 252, DS0s per
boards: 1000, redundancy support: 1:N Redundancy. It also
provides: optical circuits to the access provider network in
support of high density channelized services, which eliminates
the need for costly conversion equipment (DACS) and simplifies
cable management. The LM supports T3, T1, E1, and DS0
channelization, with support for Frame Relay, PPP, and HDLC.
Part # OC12/STM-4
Product Description: The cOC12-Frame has 1 port, connector
type: multi-mode or single-mode, performance: line rate, T3s per
board: 12, T1s per board:336, E1s per board: 252, DS0s per
boards: 1000, redundancy support: 1:N Redundancy. It also
provides: optical circuits to the access provider network in
support of high density channelized services, which eliminates
the need for costly conversion equipment (DACS) and simplifies
cable management. The LM supports T3, T1, E1, and DS0
channelization, with support for Frame Relay, PPP, and HDLC.
Fast Ethernet Line Modules
Part # ERX-GEFE-MOD
Product Description: 8 Port Fast Ethernet, Connector type:
SFP (MMF/SMF), signaling: Ethernet (IEEE 802.3) 100 Base-FX,
performance: line rate for 64B packets. It also supports:
high-speed access facing Ethernet services, line rate
forwarding, and value-added services - such as VLAN tagging
(802.1Q).
Part # ERX-GEFE256M-MOD
Product Description: 8 Port Fast Ethernet, Connector type:
RJ45, signaling: Ethernet (IEEE 802.3) 10/100 Base-FX,
performance: line rate for 64B packets. It also supports:
high-speed access facing Ethernet services, line rate
forwarding, and value-added services - such as VLAN tagging
(802.1Q).
Fast Ethernet/Gigabit Ethernet Line Modules
Part # ERX-GEFE256M-MOD
Product Description: 8 Port Fast Ethernet, Connector type:
RJ45, signaling: Ethernet (IEEE 802.3) 10/100 Base-T,
performance: line rate for 64B packets. It also supports:
Fast Ethernet connections to the access network or Gigabit
Ethernet connections to the access or the core network, as
required, line rate forwarding, and provide value-added services
such as VLAN tagging (802.1Q).
Part # ERX-GEFE-MOD
Product Description: 1 Gigabit Ethernet, Connector type: SFP
(MMF/SMF), signaling: Ethernet (IEEE 802.3z), performance: line
rate for 64B packets. It also supports: Fast Ethernet
connections to the access network or Gigabit Ethernet
connections to the access or the core network, as required, line
rate forwarding, and provide value-added services such as VLAN
tagging (802.1Q).
Gigabit Ethernet Line Modules
Part # ERX-GE-MOD
Product Description: Supports 2 port Gigabit Ethernet, ports:
1 (1 active/1 redundant), connector type: SFP, signaling:
Ethernet (IEEE 802.3z), performance: line rate for 64B packets.
The ERX supports two Gigabit Ethernet Line Modules that offer
high-speed Gigabit Ethernet connections to both the access
network and the core network. The ERX-GE-MOD supports a 2 port
Gigabit Ethernet IOA, line rate forwarding, and services such as
VLAN tagging (802.1Q).
Part # ERX-HDE-MOD
Product Description: Supports 8 port Gigabit Ethernet, 8
ports, connector type: SFP, signaling: Ethernet (IEEE 802.3z),
performance: line rate for 64B packets. The ERX supports two
Gigabit Ethernet Line Modules that offer high-speed Gigabit
Ethernet connections to both the access network and the core
network. The ERX-HDE-MOD supports 2 port Gigabit Ethernet
IOA and the 8 port high density Gigabit Ethernet IOA, line rate
forwarding, and provide services such as VLAN tagging (802.1Q).
Used Juniper Overview
GGI's Best Used Network Equipment
|
