Short Product Description: uBR10K
High-Performance Card, 5DS w/upx, 20US, Spec An.
Product Description:
The Cisco Systems UBR10-MC5X20-HD Broadband Processing Engine (BPE)
is a High-Performance Universal Broadband Router 10000 Series
High-Performance Card. With 5 Downstream Ports with UPX, 20
Upstream Ports, the 5X20H delivers a truly advanced feature set – as is
presented below.
The Cisco UB10-MC5x20H-D delivers high-performance with a full 5
Downstream (Down Stream) Ports for enhanced performance and
capacity in the Cisco Universal Broadband 10000 Series. This
broadband module supports an amazing 64,000 subscribers!
The Cisco® 5x20H Broadband Processing Engine (BPE) for the Cisco
uBR10012 Universal Broadband Router 10012 merges
industry-leading port density, an advanced RF feature set,
future-generation advanced time division multiple access (A-TDMA)
capacities, and DOCSIS® and European DOCSIS (Euro-DOCSIS)
support – all on a single line card (Figure 1 Below). The Cisco
5x20H BPE is a performance-enhanced update and replacement of
the Cisco 5x20U Broadband Processing Engine with incremental
memory and processor capability. This line card also carries an
extended DOCSIS upstream frequency range of 5 to 55 MHz as well
as downstream support of 70 to 860 MHz for DOCSIS operations in
Japan and other countries in the Asia Pacific region.
The Cisco 5x20H BPE (Figure 1 Below) answers the expanding
service and operational needs of cable operators and network
administrators. A set of full advanced features and a scalable
architecture make the Cisco 5x20H BPE a perfect choice for cable
operators facing the problems of delivering carrier-class
IP-based data, voice, and video services to an ever expanding
number of subscribers. The Cisco 5x20H BPE works with the Cisco
1-Gbps (1 Gigabit per second) Wideband Shared Port Adapter (SPA)
for the Cisco uBR10012 Series and Cisco SPA Interface Processor
for the 1-Gbps Wideband Shared Port Adapter. The Cisco 5x20H BPE
Card can be purchased as a pre-owned Cisco UBR10-MC5x20H-D card,
a used Cisco UBR10-MC5x20H-D card, a Cisco Authorized
Refurbished UBR10-MC5x20H-D card, or a New Cisco UBR10-MC5x20H-D
card – Call or email Genesis Global for details at:
sales@gginetworks.com or 1-800-908-9665.
Figure 1. Cisco 5x20H BPE – UBR10-MC5x20H-D Line Card


Product Overview: The Cisco 5x20H BPE is a cable
interface line card for the Cisco uBR10012 that performs cable
modem termination system (CMTS) functions, including:
● Physical layer (PHY) RF interface (upstream burst demodulation, downstream modulation,
RF upconversion)
● MAC processing (modem registration, transmission opportunity scheduling, Layer 2 quality of service
[QoS])
● Onboard packet processing
Presenting a highly integrated and robust RF front end and an
advanced processing engine for
DOCSIS-based and Euro-DOCSIS-based networks, the Cisco 5x20H BPE
allows high performance,
trustworthy, and secure bidirectional transmission of IP
(Internet Protocol) packets over the cable plant for data,
voice, and video services. The card carries:
● DOCSIS: 6 MHz National Television Systems Committee
(NTSC) channel operation, using standard (STD), Harmonic
Related Carrier (HRC), or Incremental Related Carrier (IRC)
frequency plans conforming to EIA-S542 and ITU J.83 Annex B.
The card supports downstream port channels in the 88 to 860
MHz (Megahertz) range, and upstream port channels in the 5
to 42 MHz range.
● Euro-DOCSIS: 8 MHz Phase Alternating Line (PAL) and
Systemme Electronique Couleur Avec Memoire (SECAM - French)
channel plans conforming to the ITU J.83 Annex A standard.
The card supports a larger upstream spectrum range of 5 to
65 MHz and an enhanced downstream channel width of 8 MHz.
● DOCSIS with extensions for Japan and Asia: 6 MHz Annex
B extension support with a downstream extended frequency
range of 70 to 860 MHz and an upstream extended frequency
range of 5 to 55 MHz.
Advanced RF Front End Capabilities:
The
Cisco 5x20H BPE presents an advanced RF front-end design,
matching a very high level of integration with superior RF
robustness and presentation. The ground-breaking design, which
uses leading PHY chips from numerous vendors, features five (5)
downstream modulators, five (5) upconverters, and 20 upstream
burst receivers on a single line card. It embeds sophisticated
RF capabilities, such as direct sampling of the upstream
channels and doorway noise cancellation with advanced
equalization.
Superior MAC Support:
The Cisco 5x20H BPE (UBR10MC5X20H-D) features committed MAC
layer hardware for superior performance in massive deployments.
The Cisco 5x20H BPE MAC layer hardware enables scalability to
thousands of cable modems, simultaneously providing hardware
increase of velocity for sophisticated security features, such
as DOCSIS 1.1 extensions to baseline privacy interface (BPI). It
also provides hardware acceleration for functions such as
concatenation, fragmentation, and payload header suppression
(PHS) necessary to set up advanced data and voice services.
Table 1 below catalogs the Cisco 5x20H BPE features and
benefits, while Table 2 below lists specifications.
Table 1.
Product Features and Benefits of the Cisco UBR10-MC5x20H-D BPE Line Card
High port density
● Reduces per-port cost
● Maximizes plant capacity (frequency recycle)
Advanced RF front end
● Optimizes RF presentation and robustness
Integrated upconverter
● Reduces operational cost and difficulty
Dense connector
● Reduces installation time
● Reduces mean time to repair (MTTR)
Onboard spectrum analyzer hardware
● Reduces return-path
monitoring costs
● Enhances remote troubleshooting capabilities
Dedicated MAC layer hardware
● Provides hardware acceleration of DOCSIS 1.1 features
● Enables scalability of data and voice deployment
● Optimizes cable modem registration time
● Provides hardware-based Layer 2 QoS
● Allows use of best-of-class PHY
DOCSIS, Euro-DOCSIS, and extensions
to support DOCSIS operations in Japan And Other Asian Countries
● Provides operational savings
● Lowers capital expenditures (CapEx)
● Increases elasticity
DOCSIS and Euro-DOCSIS 2.0 capable
● DOCSIS 1.x and 2.0 deployments
● Maximizes return on investment
● Provides advanced PHY robustness for DOCSIS 1.x and 2.0 deployments
Compatible with the Cisco uBR 3x10 RF Switch
● Preserves investment, independent of CMTS chassis or line-card technology choices
Table 2. Specifications of the Cisco UBR10-MC5x20H-D BPE Line Card
Physical
● resides in a single line card slot in the Cisco uBR10012 chassis
● Interface: line card single mode, with intermediate reach connector
● Hot-swappable; no slot dependency
● Weight: 16 lb (7.26 kg)
● Dimensions (H x W x D): 20 x 1.36 x 16 in.
● (50.80 x 3.55 x 10.64 cm)
Power
● Unit power: 185W
Reliability and Availability
● Mean time between failure (MTBF): 75,610 hr
Environmental
● Operating altitude: -197 to 13,123 ft (-60 to 4000 m)
● Storage temperature: -4 to 149°F (-20 to 65°C)
● Operating temperature, nominal: 41 to 104°F (5 to 4 0°C)
● Storage relative humidity: 5 to 95%
● Operating relative humidity: 10 to 90%
Software Release
● Cisco IOS ® Software Release 12.3(17)BC2 or higher
Regulatory Compliance
Safety
● UL 1950, Third Edition (Safety of Information
Technology Equipment, including Electrical Business Equipment), with no D3 deviations
● CSA 950 1995 Third Edition (Safety of Information Equipment
Technology, including Electrical Business Equipment)
● EN 60950 (Safety of Information Equipment Technology, Including Electrical
Business Equipment)
● IEC 60950
● ACA TS001, 1997 Test Report and Statement of Compliance
AS/NZS3260
Electromagnetic Emissions
● EN55022: 1998 Class B
● CISPR 22: 1997 Class B
● CFR 47 Part 15 Class B
● ICES -003, Issue 2, Class B, April 1995
● VCCIV-3/2000.04
● AS/NZS 3548: 1995 Class B
● CNS-13438 Class B—BSMI (BCIQ) in Taiwan
Electromagnetic Immunity
● EN50082-1: 1992
● EN50082-1: 1997
● EN55024: 1998
● EN61000-3-2: 1995
● EN61000-3-3: 1995
● EN61000-4-2: 1995 (including AMD1 + AMD2) ESD immunity
● EN61000-4-3: 1997 Radiated RF field immunity
● EN61000-4-4: 1995 Immunity to electrical fast transients
● EN61000-4-5: 1995 Surge immunity
● EN61000-4-6: 1996 (including AMD1) RF conducted immunity
Network Equipment Building Systems
(NEBS): Level 3
● Designed and tested to meet requirements of GR-1089-CORE - Issue 2, December 1997
● Revision 1, February 1999
Mechanical
● IEC 68-2-1, IEC 68-2-2, IEC 68-2-56:
Operational temperature and humidity
● IEC 68-2-27: Operating shock
● IEC 68-2-64, IEC 68-2-6, IEC 68-2-47: Operating and non-operating vibration
● IEC 68-2-32: Non-operating freefall drop
● IEC 68-2-40: Non-working altitude
● IEC 68-2-27, IEC 68-2-32: Non-operating mechanical shock
● IEC 68-2-3: Non-operating humidity
● IEC 68-2-14, IEC 68-2-33: Non-operating temperature shock
● LEDs (Light Emitting Device)
One power LED (green)
One status LED (green/yellow): solid green indicates the
processor has booted and passed its diagnostics; LED blinks green on a protect card, yellow when in one of the booting
states
Maintenance (yellow): indicates the line card can be removed One
upstream-enabled LED on each upstream port (green): upstream path is configured and able to pass traffic
One downstream-enabled LED on each downstream port (green):
downstream path is configured and able to pass traffic through the upconverter at the radio frequencies.
Network Management Information
Standard MIBs
● IF-MIB (RFC-2233)
● ENTITY-MIB (RFC-2737)
● MIBII (RFC1213)
● EtherLike-MIB (RFC-2665)
● IGMP-MIB (RFC-2993)
● RMON-MIB (RFC-1757)
Expression MIBs
● SNMPv2-SMI
● SNMPv2-TC
● SNMPv2-MIB
● IANAifType-MIB
Simple Network Management Protocol
Version 3 (SNMPv3) MIBs
● SNMP-FRAMEWORK-MIB (RFC-2571)
● SNMP-MPD-MIB (RFC-2572)
● SNMP-NOTIFICATION-MIB (RFC-2573)
● SNMP-TARGET-MIB (RFC-2573)
● SNMP-USM-MIB (RFC-2574)
● SNMP-VACM-MIB (RFC-2575)
DOCSIS and Euro-DOCSIS MIB
● DOCS-IF-MIB (v2 Rev04)
● DOCS-CABLE-DEVICE-MIB (RFC-2669)
● DOCS-BPI-PLUS-MIB (Rev 5)
● DOCS-QOS-MIB (Rev 4)
● DOCS-CABLE-DEVICE-TRAP-MIB
● DOCS-SUBMGT-MIB (Rev 2)
Cisco DOCSIS MIBs
● CISCO-DOCS-EXT-MIB
● CISCO-DOCS-REMOTE-QUERY-MIB
● CISCO-DOCS-QOS-EXT-MIB
● CISCO-CABLE-SPECTRUM-MIB
● CISCO-CABLE-AVAILABILITY-MIB
● CISCO-DOCS-EXT-CAPABILITY-MIB
Cisco Generic MIBs
● CISCO-SYSLOG-MIB
● CISCO-SMI-MIB
● CISCO-TC-MIB
● CISCO-PRODUCTS-MIB
● CISCO-FLASH-MIB
● CISCO-CONFIG-MAN-MIB
● CISCO-CONFIG-COPY-MIB
● CISCO-MEMORY-POOL-MIB
● CISCO-BULK-FILE-MIB
● CISCO-SONET-MIB
● CISCO-TCP-MIB
● CISCO-RTTMON-MIB
● CISCO-FTP-CLENT-MIB
● CISCO-IPMROUTE-MIB
● CISCO-QUEUE-MIB
● CISCO-IMAGE-MIB
● CISCO-ENVMON-MIB
● CISCO-ENTITY-VENDORTYPE-OID-MIB
● CISCO-PRODUCTS-MIB
Ordering Information
Part Number and Product Description
UBR10-5x20H-D
The
new Cisco uBR10012 BPE offers 5 downstreams with upconverter,
20 upstreams, spectrum analyzer, and a dense connector. The
dense connector is designed to simplify installation and
maximize serviceability. Please make sure you procure a
correctly terminated cable to connect to this connector by
ordering one of the cable kits from Cisco or by purchasing an
equivalent set from White Sands Engineering (www.whitesandsengineering.com). Table 3
lists part numbers and descriptions.
Table 3. Cable Kits Part Numbers and Descriptions for the
Cisco UBR10-MC5x20H-D BPE Line Card
UBR10-5x20H-D CAB-RFSW520QTIMM cable bundle,
5x20-Dense to RF switch, 1 m, term CAB-RFSW520QTPMF cable
bundle, 5x20-Dense to cable operator plant, 3 m
2x WS943 (10-pack) and 1x WS942 (5-pack) Mini RG59 95% TC
Braid 100% foil shield.
OTHER RELATED UBR 10012 SERIES LINE CARDS:
|
SPA-24XDS-SFP= |
Cisco SPA-24XDS-SFP - 24-Port uBR10012
Wideband Downstream Shared Port Adapter |
|
UBR10-2XDS-SIP=
|
Cisco UBR10-2XDS-SIP – uBR 10012
Wideband Downstream-only SPA Carrier Card |
|
UBR10-4MC5X20H-D= |
Cisco UBR10-4MC5X20H-D – Quantity 4
UBR10-MC5X20H-D Line Cards Bundle |
|
10000-SIP-600= |
Cisco 10000-SIP-600 – Cisco 10000 Series
SPA Interface Processor-600 |
|
SPA-5X1GE-V2= |
Cisco SPA-5X1GE-V2 – 5-Port Gigabit
Ethernet Shared Port Adapter |
|
SPA-1X10GE-L-V2= |
Cisco SPA-1X10GE-L-V2 – 1-Port 10GE LAN-PHY
Shared Port Adapter |